Nakiri AUS-10 Wave Nickel Damascus Zelkova Handle 165mm-AUS-10-Damascus-Japanese Handle-[Musashi]-[Japanese-Kitchen-Knives]
Nakiri AUS-10 Wave Nickel Damascus Zelkova Handle 165mm-AUS-10-Damascus-Japanese Handle-[Musashi]-[Japanese-Kitchen-Knives]
Nakiri AUS-10 Wave Nickel Damascus Zelkova Handle 165mm-AUS-10-Damascus-Japanese Handle-[Musashi]-[Japanese-Kitchen-Knives]
Nakiri AUS-10 Wave Nickel Damascus Zelkova Handle 165mm-AUS-10-Damascus-Japanese Handle-[Musashi]-[Japanese-Kitchen-Knives]
Nakiri AUS-10 Wave Nickel Damascus Zelkova Handle 165mm-AUS-10-Damascus-Japanese Handle-[Musashi]-[Japanese-Kitchen-Knives]
Nakiri AUS-10 Wave Nickel Damascus Zelkova Handle 165mm-AUS-10-Damascus-Japanese Handle-[Musashi]-[Japanese-Kitchen-Knives]
Nakiri AUS-10 Wave Nickel Damascus Zelkova Handle 165mm-AUS-10-Damascus-Japanese Handle-[Musashi]-[Japanese-Kitchen-Knives]
Nakiri AUS-10 Wave Nickel Damascus Zelkova Handle 165mm-AUS-10-Damascus-Japanese Handle-[Musashi]-[Japanese-Kitchen-Knives]

Nakiri AUS-10 Wave Nickel Damascus Zelkova Handle 165mm

H210

일반 가격¥31,800
/

Need something to chop vegetables like a pro? Look no further than the Nakiri AUS-10 Wave Nickel Damascus Zelkova Handle 165mm! A blade that packs a pun(ch), this kitchen miracle'll have you slicing, dicing and julienning your way to a five-star cook's rating. So go on, get ready to master your veggies in no time!

편평한 직사각형 칼날, 편평한 끝 및 두꺼운 가시를 가진 야채에 주로 사용됩니다. 배추와 양배추를 조각으로 자르는 데 가장 적합합니다. 껍질을 벗기고, 자르고, 회전 절단하고, 면도하고, 장식용으로도 적합합니다.

AUS-10 Stainless Steel
AUS-10 steel is one of the best steels used to make good-quality knives. It has good edge retention, toughness, hardness, corrosion resistance, and wear resistance.It is very easy to sharpen the knives made of AUS-10 stainless steel and they attain a very perfect edge. The sharpening of AUS-10A steel is easy and can be achieved through different sharpening materials.

Damascus is a laminated steel knife made of several layers of different steel materials. The center of the blade is made of hard steel for sharpness, and both sides are covered with multiple soft steel materials. The multiple steels are metallurgically joined, not by plating or glue. The more the blade is forged, the more complex the ripples become, and the more beautiful the unique grain pattern becomes.

블레이드 재질: AUS-10 Stainless

블레이드 HRC: 60~61

블레이드 마감: Wave Nickel Damascus

블레이드 유형: Double-edged

블레이드 길이: 165mm

블레이드 두께: 2mm

총 길이:

핸들 길이:

무게: 145g

핸들: Zelkova Handle

원산지: 고치현 토사시

포함된 겹: Yes (적합한 겹 선택)

■ 칼을 비틀며 사용하지 마십시오.
■ 뼈, 얼음 또는 딱딱한 물건을 자를 때는 적절한 칼을 사용하십시오.
■ 이미지는 샘플 제품의 것입니다. 각 제품은 수작업으로 제작되기 때문에 색상, 무게, 무늬 및 크기가 다를 수 있습니다.
■ 칼 날을 보호하기 위해 부드러운 플라스틱이나 나무의 절단판을 사용하십시오.
■ 갑자기 가열하거나 식히지 마십시오. 그렇게 하면 강철의 구조가 변할 수 있습니다.
■ 추가 문의 사항이 있으면 언제든지 저희에게 문의하십시오.

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
L
LINGLIA nice balanced blade.

A nice balanced blade.

다음 사항도 고려하십시오.

제품 특징

수제 단조

전통적인 단조 공정을 통해 철 소재의 분자를 미세하게 조정하여 숨 쉬는 '살아있는 식칼'을 완성합니다.

내구성

칼날을 만들기 위해 각 재료를 가열하고 단조하는 과정을 서너 번 반복하여 칼날의 모양을 빠르게 만들고 강철에서 탄소가 방출되어 원래의 강도를 잃기 전에 내구성을 확보합니다.

샤프니스

칼날은 최상의 선명도를 구현하는 데 가장 중요한 요소입니다. 자체 블레이드 공장에서 연마하여 타협하지 않는 날카로움을 선사합니다.

핸들

내구성과 고급스러움, 그립감이 좋고 장시간 사용해도 피로감을 느끼지 않는 모양을 최우선으로 고려했습니다.

Material 샤프니스녹슬지 않는강도
선명하게 하기
VG-10★★★★
★★★★★★★★★★★
실버 스틸 #3★★★★★★★★★★★★★★★★
화이트 스틸 #1★★★★★★★★★★★★
화이트 스틸 #2★★★★★★★★★★★
블루 스틸 #1★★★★★★★★★★★★★★
블루 스틸 #2★★★★★★★★★★★★★
아오가미 슈퍼★★★★★★★★★★★★★★★

WHY MUSASHI

최저 가격 보장

우리는 일본 현지 제조업체이며 소비자에게 직접 판매하며 최고의 가격과 고급 칼을 보장합니다.

항상 노력하는 자세

최고의 일본 칼일 뿐만 아니라 소비자의 피드백을 바탕으로 제품의 품질을 개선하기 위해 노력하고 있습니다.

전세계 배송

All orders will be shipped directly from Japan to the address you specify.

FAQs